FineR (Fine Wooden Creations) / art / craft / 1.5 cm

FineR UNI (Art / Coating 1.5cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear (fast high-gloss finish) coating dobra (UV lacquer finish recommended) ratio 2:1

About the product

FineR UNI (Art / Coating 1.5cm) by FineR (Fine Wooden Creations) is a coating epoxy resin for art / craft work, with a maximum working layer of 1.5 cm. The database records a 2:1 mix ratio, working time around 45 min, transparency described as crystal clear (fast high-gloss finish), UV resistance: dobra (UV lacquer finish recommended) and viscosity: no viscosity data. Full cure is listed as 1 day (24 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For FineR UNI (Art / Coating 1.5cm), the key is calm setup and process control. Work at a stable temperature around 18-26C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 2:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 1.5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

FineR UNI (Art / Coating 1.5cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 1 day (24 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcoating

Ratio2:1

Demold1 day (24 h)

Full cure1 day (24 h)

Working tips

Work at a stable temperature around 18-26C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 2:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for FineR (Fine Wooden Creations) FineR UNI (Art / Coating 1.5cm)?

The NeuroResin database lists the maximum working layer as 1.5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of FineR (Fine Wooden Creations) FineR UNI (Art / Coating 1.5cm)?

The listed working time is about 45 min. It depends on temperature, mixed mass and pour geometry.

When does FineR (Fine Wooden Creations) FineR UNI (Art / Coating 1.5cm) reach full cure?

Full cure is listed as 1 day (24 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.