Techniplast / art / craft / 2 cm

3D-UVLS + SC (Castings up to 2 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear casting very high (bloker UV + HALS) ratio 100:40

About the product

3D-UVLS + SC (Castings up to 2 cm) by Techniplast is a casting epoxy resin for art / craft work, with a maximum working layer of 2 cm. The database records a 100:40 mix ratio, working time around 45 min, transparency described as crystal clear, UV resistance: very high (bloker UV + HALS) and viscosity: no viscosity data. Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For 3D-UVLS + SC (Castings up to 2 cm), the key is calm setup and process control. Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. Zalecana cienka layer 400 UVLS lub 3D-UVLS+SC jako grunt. The 2 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

3D-UVLS + SC (Castings up to 2 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcasting
Ratio100:40
Demold1 day (24 h)
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Techniplast 3D-UVLS + SC (Castings up to 2 cm)?

The NeuroResin database lists the maximum working layer as 2 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Techniplast 3D-UVLS + SC (Castings up to 2 cm)?

The listed working time is about 45 min. It depends on temperature, mixed mass and pour geometry.

When does Techniplast 3D-UVLS + SC (Castings up to 2 cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.

Techniplast / art / craft400 UVLS (Floors / Coating up to 1 cm)1 cm / 35 min Kinga Kowalska Art / art / craftArt Resin (Castings / Resin Art up to 2 cm)2 cm / 1 h (60 min) Premium Resin / art / craftKANION Epoxy2 cm / 35 min Epodex / art / craftPRO (Art / Craft up to 2 cm)2 cm / 1.1 h (65 min)

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.