Micronfloor (Mikron) / deep pour / 10 cm

Pox Max 400 Crystaline UV (Deep Pour 10cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear (self-degassing) ultra deep high (bloker UV + stabilizator HALS) ratio 100:40

About the product

Pox Max 400 Crystaline UV (Deep Pour 10cm) by Micronfloor (Mikron) is an ultra deep epoxy resin for deep pour work, with a maximum working layer of 10 cm. The database records a 100:40 mix ratio, working time around 36 h (2160 min), transparency described as crystal clear (self-degassing), UV resistance: high (bloker UV + stabilizator HALS) and viscosity: low (~300 mPas). Full cure is listed as 14 days (336 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For Pox Max 400 Crystaline UV (Deep Pour 10cm), the key is calm setup and process control. Work at a stable temperature around 18-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 10 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

Pox Max 400 Crystaline UV (Deep Pour 10cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 14 days (336 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classultra deep

Ratio100:40

Demold3 days (72 h)

Full cure14 days (336 h)

Working tips

Work at a stable temperature around 18-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Micronfloor (Mikron) Pox Max 400 Crystaline UV (Deep Pour 10cm)?

The NeuroResin database lists the maximum working layer as 10 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Micronfloor (Mikron) Pox Max 400 Crystaline UV (Deep Pour 10cm)?

The listed working time is about 36 h (2160 min). It depends on temperature, mixed mass and pour geometry.

When does Micronfloor (Mikron) Pox Max 400 Crystaline UV (Deep Pour 10cm) reach full cure?

Full cure is listed as 14 days (336 h). Demolding may be possible earlier, around 3 days (72 h), but machining is best planned after full cure.

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.