Techniplast / deep pour / 10 cm
Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.
3D-UVLS + LC (Deep Pour up to 10 cm) by Techniplast is an ultra deep epoxy resin for deep pour work, with a maximum working layer of 10 cm. The database records a 100:40 mix ratio, working time around 6 h (360 min), transparency described as water clear, UV resistance: very high (bloker UV + HALS) and viscosity: no viscosity data. Full cure is listed as 14 days (336 h), so mechanical work should be planned with a safety margin rather than only around demolding time.
For 3D-UVLS + LC (Deep Pour up to 10 cm), the key is calm setup and process control. Work at a stable temperature around 15-20C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 10 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.
3D-UVLS + LC (Deep Pour up to 10 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 14 days (336 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.
The NeuroResin database lists the maximum working layer as 10 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.
The listed working time is about 6 h (360 min). It depends on temperature, mixed mass and pour geometry.
Full cure is listed as 14 days (336 h). Demolding may be possible earlier, around 4 days (96 h), but machining is best planned after full cure.
The link comes from the current NeuroResin resin database record.
This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.