Resoltech / river table / 0.5 cm

RESOLTECH 1600 + 1606 (Flexible epoxy system)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

clear with slight orange tint in mix casting low to medium ratio 100:126

About the product

RESOLTECH 1600 + 1606 (Flexible epoxy system) by Resoltech is a casting epoxy resin for river table work, with a maximum working layer of 0.5 cm. The database records a 100:126 mix ratio, working time around 3.7 h (220 min), transparency described as clear with slight orange tint in mix, UV resistance: low to medium and viscosity: medium (~500 mPas mix @23C). Full cure is listed as 14 days (336 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For RESOLTECH 1600 + 1606 (Flexible epoxy system), the key is calm setup and process control. Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:126 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. Nie jest dedykowanym primerem do mebli; raczej system techniczny. The 0.5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

RESOLTECH 1600 + 1606 (Flexible epoxy system) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 14 days (336 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcasting
Ratio100:126
Demold1 day (24 h)
Full cure14 days (336 h)

Working tips

Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:126 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Resoltech RESOLTECH 1600 + 1606 (Flexible epoxy system)?

The NeuroResin database lists the maximum working layer as 0.5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Resoltech RESOLTECH 1600 + 1606 (Flexible epoxy system)?

The listed working time is about 3.7 h (220 min). It depends on temperature, mixed mass and pour geometry.

When does Resoltech RESOLTECH 1600 + 1606 (Flexible epoxy system) reach full cure?

Full cure is listed as 14 days (336 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.

Resoltech / river tableRESOLTECH 1050 + 1055S (Low-viscosity laminating reference)0.5 cm / 3 h (180 min) Sicomin / river tableGreenPoxy 33 + SD 4773 (bio-based composite reference)0.5 cm / 1.1 h (65 min) Sicomin / river tableSR 1710 + SD 3304 (Injection / Infusion reference)0.5 cm / 2 h (118 min) Sicomin / river tableSR 8500 + SZ 8525 (Fast & clear hot-process epoxy)0.5 cm / 1.4 h (85 min)

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.