Sicomin / river table / 0.5 cm

GreenPoxy 33 + SD 4773 (bio-based composite reference)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

colourless / clear casting medium ratio 100:27

About the product

GreenPoxy 33 + SD 4773 (bio-based composite reference) by Sicomin is a casting epoxy resin for river table work, with a maximum working layer of 0.5 cm. The database records a 100:27 mix ratio, working time around 1.1 h (65 min), transparency described as colourless / clear, UV resistance: medium and viscosity: medium (~820 mPas @20C, ~485 mPas @30C dla SD 4773). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For GreenPoxy 33 + SD 4773 (bio-based composite reference), the key is calm setup and process control. Work at a stable temperature around 15-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:27 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. Nie jest dedykowanym primerem do drewna. The 0.5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

GreenPoxy 33 + SD 4773 (bio-based composite reference) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcasting
Ratio100:27
Demold30 h
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 15-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:27 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Sicomin GreenPoxy 33 + SD 4773 (bio-based composite reference)?

The NeuroResin database lists the maximum working layer as 0.5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Sicomin GreenPoxy 33 + SD 4773 (bio-based composite reference)?

The listed working time is about 1.1 h (65 min). It depends on temperature, mixed mass and pour geometry.

When does Sicomin GreenPoxy 33 + SD 4773 (bio-based composite reference) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 30 h, but machining is best planned after full cure.

Sicomin / river tableSR 1710 + SD 3304 (Injection / Infusion reference)0.5 cm / 2 h (118 min) Sicomin / river tableSR 8500 + SZ 8525 (Fast & clear hot-process epoxy)0.5 cm / 1.4 h (85 min) Resoltech / river tableRESOLTECH 1050 + 1055S (Low-viscosity laminating reference)0.5 cm / 3 h (180 min) Resoltech / river tableRESOLTECH 1600 + 1606 (Flexible epoxy system)0.5 cm / 3.7 h (220 min)

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.