Troton / deep pour / 5 cm
Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.
Casting Epoxy SLOW 50 by Troton is a deep cast epoxy resin for deep pour work, with a maximum working layer of 5 cm. The database records a 100:35 mix ratio, working time around 4 h (240 min), transparency described as clear, UV resistance: high and viscosity: resin 600-900 mPa.s, hardener <100 mPa.s @25C. Full cure is listed as 1 day (24 h), so mechanical work should be planned with a safety margin rather than only around demolding time.
For Casting Epoxy SLOW 50, the key is calm setup and process control. Keep the pour within the 5 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup. Keep the pour within the 5 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup. For wood and porous substrates, apply a seal coat before the main pour. The 5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Keep the pour within the 5 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup.
Casting Epoxy SLOW 50 is best treated as a product for projects where the layer limit, patient degassing and full cure time of 1 day (24 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.
The NeuroResin database lists the maximum working layer as 5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.
The listed working time is about 4 h (240 min). It depends on temperature, mixed mass and pour geometry.
Full cure is listed as 1 day (24 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.
The link comes from the current NeuroResin resin database record.
This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.