Premium Resin / deep pour / 4 cm
Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.
M3 + MEDIUM Epoxy by Premium Resin is a deep cast epoxy resin for deep pour work, with a maximum working layer of 4 cm. The database records a 100:50 mix ratio, working time around 1.5 h (90 min), transparency described as clear, UV resistance: no data and viscosity: low / medium. Full cure is listed as 4 days (96 h), so mechanical work should be planned with a safety margin rather than only around demolding time.
For M3 + MEDIUM Epoxy, the key is calm setup and process control. Keep the pour within the 4 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup. Keep the pour within the 4 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup. For wood and porous substrates, apply a seal coat before the main pour. The 4 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Keep the pour within the 4 cm layer limit, control workshop temperature and make a small test sample with the final pigment, wood and mold setup.
M3 + MEDIUM Epoxy is best treated as a product for projects where the layer limit, patient degassing and full cure time of 4 days (96 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.
The NeuroResin database lists the maximum working layer as 4 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.
The listed working time is about 1.5 h (90 min). It depends on temperature, mixed mass and pour geometry.
Full cure is listed as 4 days (96 h). Demolding may be possible earlier, around 42 h, but machining is best planned after full cure.
This resin record does not currently include a public purchase link.
This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.