Artline / river table / 6 cm

Wood PRO (River Table / Deep Pour up to 6 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

water clear (crystal-clear, glass-like) deep cast high (extra UV protection, non-yellowing) ratio 3:1

About the product

Wood PRO (River Table / Deep Pour up to 6 cm) by Artline is a deep cast epoxy resin for river table work, with a maximum working layer of 6 cm. The database records a 3:1 mix ratio, working time around 30 min, transparency described as water clear (crystal-clear, glass-like), UV resistance: high (extra UV protection, non-yellowing) and viscosity: low (water-like, self-leveling). Full cure is listed as 4 days (96 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For Wood PRO (River Table / Deep Pour up to 6 cm), the key is calm setup and process control. Work at a stable temperature around 15-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 3:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 6 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

Wood PRO (River Table / Deep Pour up to 6 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 4 days (96 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classdeep cast

Ratio3:1

Demold3 days (72 h)

Full cure4 days (96 h)

Working tips

Work at a stable temperature around 15-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 3:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Artline Wood PRO (River Table / Deep Pour up to 6 cm)?

The NeuroResin database lists the maximum working layer as 6 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Artline Wood PRO (River Table / Deep Pour up to 6 cm)?

The listed working time is about 30 min. It depends on temperature, mixed mass and pour geometry.

When does Artline Wood PRO (River Table / Deep Pour up to 6 cm) reach full cure?

Full cure is listed as 4 days (96 h). Demolding may be possible earlier, around 3 days (72 h), but machining is best planned after full cure.

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.