Techniplast / river table / 5 cm

3D-UVLS + MC (Castings up to 5 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear deep cast very high (bloker UV + HALS) ratio 100:40

About the product

3D-UVLS + MC (Castings up to 5 cm) by Techniplast is a deep cast epoxy resin for river table work, with a maximum working layer of 5 cm. The database records a 100:40 mix ratio, working time around 2 h (120 min), transparency described as crystal clear, UV resistance: very high (bloker UV + HALS) and viscosity: no viscosity data. Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For 3D-UVLS + MC (Castings up to 5 cm), the key is calm setup and process control. Work at a stable temperature around 15-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

3D-UVLS + MC (Castings up to 5 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classdeep cast
Ratio100:40
Demold2 days (48 h)
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 15-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Techniplast 3D-UVLS + MC (Castings up to 5 cm)?

The NeuroResin database lists the maximum working layer as 5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Techniplast 3D-UVLS + MC (Castings up to 5 cm)?

The listed working time is about 2 h (120 min). It depends on temperature, mixed mass and pour geometry.

When does Techniplast 3D-UVLS + MC (Castings up to 5 cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 2 days (48 h), but machining is best planned after full cure.

Kinga Kowalska Art / river tableDeep Pour (River Table up to 5 cm)5 cm / 1 h (60 min) Epodex / river tableECO+ (River Table up to 5 cm)5 cm / 6 h (360 min) Dipon / river tableEpoxyPlast 3D B50 DeepPour5 cm / 5 h (300 min) ResinPro / river tableEpoxyTable 5-Five (Tavoli / River up to 5 cm)5 cm / 3 h (180 min)

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.