FineR (Fine Wooden Creations) / deep pour / 7 cm

FineR DEEP (Deep Pour 7cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear ultra deep bardzo dobra (zalecany dodatkowy stabilizator UV FineR) ratio 100:40

About the product

FineR DEEP (Deep Pour 7cm) by FineR (Fine Wooden Creations) is an ultra deep epoxy resin for deep pour work, with a maximum working layer of 7 cm. The database records a 100:40 mix ratio, working time around 30 h (1800 min), transparency described as crystal clear, UV resistance: bardzo dobra (zalecany dodatkowy stabilizator UV FineR) and viscosity: low (self-degassing). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For FineR DEEP (Deep Pour 7cm), the key is calm setup and process control. Work at a stable temperature around 15-20C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 7 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

FineR DEEP (Deep Pour 7cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Zalecany dodatkowy stabilizator UV FineR lub lacquer PU. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classultra deep
Ratio100:40
Demold4 days (96 h)
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 15-20C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for FineR (Fine Wooden Creations) FineR DEEP (Deep Pour 7cm)?

The NeuroResin database lists the maximum working layer as 7 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of FineR (Fine Wooden Creations) FineR DEEP (Deep Pour 7cm)?

The listed working time is about 30 h (1800 min). It depends on temperature, mixed mass and pour geometry.

When does FineR (Fine Wooden Creations) FineR DEEP (Deep Pour 7cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 4 days (96 h), but machining is best planned after full cure.

FineR (Fine Wooden Creations) / deep pourFineR ULTRA (Ultra Deep Pour 12cm)12 cm / 36 h (2160 min) Techniplast / deep pour3D-UVLS + LC (Deep Pour up to 10 cm)10 cm / 6 h (360 min) Micronfloor (Mikron) / deep pourPox Max 400 Crystaline UV (Deep Pour 10cm)10 cm / 36 h (2160 min) Epodex / deep pourPRO MAX (Deep Pour up to 10 cm, Crystal Clear)10 cm / 8 h (480 min)

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.