Micronfloor (Mikron) / river table / 5 cm

Pox 500 Crystaline UV (Deep Pour 5cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear deep cast high (bloker UV + stabilizator HALS) ratio 100:40

About the product

Pox 500 Crystaline UV (Deep Pour 5cm) by Micronfloor (Mikron) is a deep cast epoxy resin for river table work, with a maximum working layer of 5 cm. The database records a 100:40 mix ratio, working time around 24 h (1440 min), transparency described as crystal clear, UV resistance: high (bloker UV + stabilizator HALS) and viscosity: low (~300 mPas). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For Pox 500 Crystaline UV (Deep Pour 5cm), the key is calm setup and process control. Work at a stable temperature around 18-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

Pox 500 Crystaline UV (Deep Pour 5cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classdeep cast
Ratio100:40
Demold2 days (48 h)
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 18-23C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Micronfloor (Mikron) Pox 500 Crystaline UV (Deep Pour 5cm)?

The NeuroResin database lists the maximum working layer as 5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Micronfloor (Mikron) Pox 500 Crystaline UV (Deep Pour 5cm)?

The listed working time is about 24 h (1440 min). It depends on temperature, mixed mass and pour geometry.

When does Micronfloor (Mikron) Pox 500 Crystaline UV (Deep Pour 5cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 2 days (48 h), but machining is best planned after full cure.

Techniplast / river table3D-UVLS + MC (Castings up to 5 cm)5 cm / 2 h (120 min) Kinga Kowalska Art / river tableDeep Pour (River Table up to 5 cm)5 cm / 1 h (60 min) Epodex / river tableECO+ (River Table up to 5 cm)5 cm / 6 h (360 min) Dipon / river tableEpoxyPlast 3D B50 DeepPour5 cm / 5 h (300 min)

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.