ResinPro / river table / 10 cm

EpoxyTable 10 (Deep Pour up to 10 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear ultra deep high (filtry UV, anti-yellowing) ratio 100:25

About the product

EpoxyTable 10 (Deep Pour up to 10 cm) by ResinPro is an ultra deep epoxy resin for river table work, with a maximum working layer of 10 cm. The database records a 100:25 mix ratio, working time around 24 h (1440 min), transparency described as crystal clear, UV resistance: high (filtry UV, anti-yellowing) and viscosity: low (~400 mPas mix; A 1900 mPas, B 40 mPas). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For EpoxyTable 10 (Deep Pour up to 10 cm), the key is calm setup and process control. Work at a stable temperature around 10-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:25 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 10 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

EpoxyTable 10 (Deep Pour up to 10 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classultra deep
Ratio100:25
Demold60 h
Full cure7 days (168 h)

Working tips

Work at a stable temperature around 10-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:25 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for ResinPro EpoxyTable 10 (Deep Pour up to 10 cm)?

The NeuroResin database lists the maximum working layer as 10 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of ResinPro EpoxyTable 10 (Deep Pour up to 10 cm)?

The listed working time is about 24 h (1440 min). It depends on temperature, mixed mass and pour geometry.

When does ResinPro EpoxyTable 10 (Deep Pour up to 10 cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 60 h, but machining is best planned after full cure.

ResinPro / river tableEpoxyTable 5-Five (Tavoli / River up to 5 cm)5 cm / 3 h (180 min) Epodex / river tableECO MAX (Deep Pour up to 10 cm)10 cm / 8 h (480 min) Dipon / river tableLuminaCast 9 Ocean Flow10 cm / 7 h (420 min) Resoltech / river tableWWA ECO / WWB4 (River Table up to 9 cm)9 cm / 24 h (1440 min)

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.