ResinPro / river table / 5 cm

EpoxyTable 5-Five (Tavoli / River up to 5 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear deep cast high (UV filters, declared yellowing resistance) ratio 100:67

About the product

EpoxyTable 5-Five (Tavoli / River up to 5 cm) by ResinPro is a deep cast epoxy resin for river table work, with a maximum working layer of 5 cm. The database records a 100:67 mix ratio, working time around 3 h (180 min), transparency described as crystal clear, UV resistance: high (UV filters, declared yellowing resistance) and viscosity: low (~300 mPas mix; A 1900 mPas, B 40 mPas). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For EpoxyTable 5-Five (Tavoli / River up to 5 cm), the key is calm setup and process control. Work at a stable temperature around 10-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:67 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 5 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

EpoxyTable 5-Five (Tavoli / River up to 5 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classdeep cast

Ratio100:67

Demold60 h

Full cure7 days (168 h)

Working tips

Work at a stable temperature around 10-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 100:67 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for ResinPro EpoxyTable 5-Five (Tavoli / River up to 5 cm)?

The NeuroResin database lists the maximum working layer as 5 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of ResinPro EpoxyTable 5-Five (Tavoli / River up to 5 cm)?

The listed working time is about 3 h (180 min). It depends on temperature, mixed mass and pour geometry.

When does ResinPro EpoxyTable 5-Five (Tavoli / River up to 5 cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 60 h, but machining is best planned after full cure.

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.