Resoltech / river table / 9 cm

WWA ECO / WWB4 (River Table up to 9 cm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

water clear (absolutely colorless, klasa referencyjna) ultra deep exceptional (unmatched on the market — formula 2017+, outdoor-capable) ratio 100:40

About the product

WWA ECO / WWB4 (River Table up to 9 cm) by Resoltech is an ultra deep epoxy resin for river table work, with a maximum working layer of 9 cm. The database records a 100:40 mix ratio, working time around 24 h (1440 min), transparency described as water clear (absolutely colorless, klasa referencyjna), UV resistance: exceptional (unmatched on the market — formula 2017+, outdoor-capable) and viscosity: very low (300 mPas). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For WWA ECO / WWB4 (River Table up to 9 cm), the key is calm setup and process control. Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 9 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

WWA ECO / WWB4 (River Table up to 9 cm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classultra deep

Ratio100:40

Demold3 days (72 h)

Full cure7 days (168 h)

Working tips

Work at a stable temperature around 18-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Resoltech WWA ECO / WWB4 (River Table up to 9 cm)?

The NeuroResin database lists the maximum working layer as 9 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Resoltech WWA ECO / WWB4 (River Table up to 9 cm)?

The listed working time is about 24 h (1440 min). It depends on temperature, mixed mass and pour geometry.

When does Resoltech WWA ECO / WWB4 (River Table up to 9 cm) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 3 days (72 h), but machining is best planned after full cure.

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.