ResinPro / art / craft / 0.3 cm

Table Top Epoxy (Coating / Worktops 1-3mm)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

high gloss clear coating medium to high ratio 100:92

About the product

Table Top Epoxy (Coating / Worktops 1-3mm) by ResinPro is a coating epoxy resin for art / craft work, with a maximum working layer of 0.3 cm. The database records a 100:92 mix ratio, working time around 1.5 h (90 min), transparency described as high gloss clear, UV resistance: medium to high and viscosity: medium (self-leveling, coating grade). Full cure is listed as 3 days (72 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For Table Top Epoxy (Coating / Worktops 1-3mm), the key is calm setup and process control. Work at a stable temperature around 20-28C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:92 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 0.3 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

Table Top Epoxy (Coating / Worktops 1-3mm) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 3 days (72 h) matter. Zwykle nie wymaga dodatkowego topcoatu; dla outdoor zalecany lacquer UV/PU. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcoating
Ratio100:92
Demold1 day (24 h)
Full cure3 days (72 h)

Working tips

Work at a stable temperature around 20-28C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:92 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for ResinPro Table Top Epoxy (Coating / Worktops 1-3mm)?

The NeuroResin database lists the maximum working layer as 0.3 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of ResinPro Table Top Epoxy (Coating / Worktops 1-3mm)?

The listed working time is about 1.5 h (90 min). It depends on temperature, mixed mass and pour geometry.

When does ResinPro Table Top Epoxy (Coating / Worktops 1-3mm) reach full cure?

Full cure is listed as 3 days (72 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.

ResinPro / art / craftArt Pro Resin (Art / Rivestimenti up to 1 cm)1 cm / 40 min ResinPro / art / craftTransparent Casting Resin/iCrystal (Jewellery/Castings up to 1.5 cm)1.5 cm / 30 min Ciech (Epidian) / art / craftEpidian 601 + Z10.3 cm / 40 min Resoltech / art / craftRESOLTECH 1070 + 1074 (Clear laminates / topcoats)0.3 cm / 3 h (180 min)

Purchase

This resin record does not currently include a public purchase link.

Back to resin database

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.