Resoltech / art / craft / 0.3 cm

RESOLTECH 1070 + 1074 (Clear laminates / topcoats)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

crystal clear / high gloss coating high (very good UV resistance) ratio 100:40

About the product

RESOLTECH 1070 + 1074 (Clear laminates / topcoats) by Resoltech is a coating epoxy resin for art / craft work, with a maximum working layer of 0.3 cm. The database records a 100:40 mix ratio, working time around 3 h (180 min), transparency described as crystal clear / high gloss, UV resistance: high (very good UV resistance) and viscosity: medium (~400 mPas mix @23C). Full cure is listed as 14 days (336 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For RESOLTECH 1070 + 1074 (Clear laminates / topcoats), the key is calm setup and process control. Work at a stable temperature around 20-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 0.3 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

RESOLTECH 1070 + 1074 (Clear laminates / topcoats) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 14 days (336 h) matter. It works as a topcoat itself; add UV/PU only for extreme use. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcoating
Ratio100:40
Demold1 day (24 h)
Full cure14 days (336 h)

Working tips

Work at a stable temperature around 20-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.
Keep the 100:40 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.
Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Resoltech RESOLTECH 1070 + 1074 (Clear laminates / topcoats)?

The NeuroResin database lists the maximum working layer as 0.3 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Resoltech RESOLTECH 1070 + 1074 (Clear laminates / topcoats)?

The listed working time is about 3 h (180 min). It depends on temperature, mixed mass and pour geometry.

When does Resoltech RESOLTECH 1070 + 1074 (Clear laminates / topcoats) reach full cure?

Full cure is listed as 14 days (336 h). Demolding may be possible earlier, around 1 day (24 h), but machining is best planned after full cure.

Resoltech / art / craftRESOLCOAT 1010 + 1014 (Primer / Varnish wood)0.2 cm / 1 h (60 min) Ciech (Epidian) / art / craftEpidian 601 + Z10.3 cm / 40 min ResinPro / art / craftTable Top Epoxy (Coating / Worktops 1-3mm)0.3 cm / 1.5 h (90 min) Ciech (Epidian) / art / craftEpidian 652 + IDA0.2 cm / 40 min

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.