Resoltech / art / craft / 0.2 cm

RESOLCOAT 1010 + 1014 (Primer / Varnish wood)

Product card with pour depth, curing time, mix ratio and practical workshop guidance from the NeuroResin database.

transparent varnish / high gloss coating medium; the 1010C version is recommended when UV resistance matters more ratio 1:1

About the product

RESOLCOAT 1010 + 1014 (Primer / Varnish wood) by Resoltech is a coating epoxy resin for art / craft work, with a maximum working layer of 0.2 cm. The database records a 1:1 mix ratio, working time around 1 h (60 min), transparency described as transparent varnish / high gloss, UV resistance: medium; the 1010C version is recommended when UV resistance matters more and viscosity: very low (water-based, primer grade). Full cure is listed as 7 days (168 h), so mechanical work should be planned with a safety margin rather than only around demolding time.

Working with it

For RESOLCOAT 1010 + 1014 (Primer / Varnish wood), the key is calm setup and process control. Work at a stable temperature around 15-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface. Keep the 1:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself. For wood and porous substrates, apply a seal coat before the main pour. The 0.2 cm layer limit should not be treated as extra safety margin when the mass is high, the mold is closed or the workshop is warm. Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Summary

RESOLCOAT 1010 + 1014 (Primer / Varnish wood) is best treated as a product for projects where the layer limit, patient degassing and full cure time of 7 days (168 h) matter. Choose a finish according to exposure, abrasion and expected sheen. Before the final pour, make a small sample using the target wood, pigment and workshop temperature.

Database parameters

Classcoating

Ratio1:1

Demold12 h

Full cure7 days (168 h)

Working tips

Work at a stable temperature around 15-25C; in colder conditions this resin may cure more slowly, turn cloudy or remain soft on the surface.

Keep the 1:1 ratio and mix slowly but thoroughly; with this resin class, poor mixing causes problems more often than the product itself.

Use the two-cup method: after the first mix, transfer into a second cup and mix again to reduce streaks and soft spots from the cup walls.

Product FAQ

What is the maximum layer for Resoltech RESOLCOAT 1010 + 1014 (Primer / Varnish wood)?

The NeuroResin database lists the maximum working layer as 0.2 cm. For larger masses, warmer workshops or closed molds, keep a safety margin.

What is the working time of Resoltech RESOLCOAT 1010 + 1014 (Primer / Varnish wood)?

The listed working time is about 1 h (60 min). It depends on temperature, mixed mass and pour geometry.

When does Resoltech RESOLCOAT 1010 + 1014 (Primer / Varnish wood) reach full cure?

Full cure is listed as 7 days (168 h). Demolding may be possible earlier, around 12 h, but machining is best planned after full cure.

Purchase link

The link comes from the current NeuroResin resin database record.

Buy product

This resin product card is generated from NeuroResin product parameters and working notes. Always verify the current manufacturer TDS/SDS before production.